Nut action -

Nut slot height should be a barely perceptible distance from the first fret when you press on the second fret This is an excellent article

Nut action - Ideally, the string sits in a slot about half the height of the string If the slot is deeper than that, some material can come off the top

Nut slot height should be a barely perceptible distance from the first fret when you press on the second fret This is an excellent article

slot 104 The G0's nut slots are deeper Therefore, only a bit of the low E string is sitting above the nut There is about 1mm at the nut between bottom

2) Nut: I like to set the nut slots at fret height Here's why and how This will result in open string 1st fret clearance of about: E = 018, A = 016

nut slot depth To cut nut slots I start by setting feeler gauges for the height of the 1st fret + , that seems pretty safe to avoid cutting too deep, and then I

The permanent way to fix it is to superglue a strip of wood veneer on the underside of the nut and then carefully sand it down until there is a